Gastroback Design Mincer Operations Instructions download pdf (Page 10)

crossed-blade knife with the mincer plate

a. Assemble the worm housing in the opening of the drive shaft.

Place the worm inside the worm housing (operate according to the

instructions ´Assembling` the appliance. see fig. 1 and 2).

b. Place the chopper attachment A on the axis of the wor m.

The slim end has to face the front (see fig. 7). T urn the chopper

attachment a little bit while pushing it into the wor m housing.

c. Place the chopper attachment B on top of the chopper

attachment A. The wide opening of the chopper attachment B

should be facing the chopper attachment A. The chopper

attachment B has a gap on the outside edge which should slide

over the guiding pin on the inside of the worm housing (see fig. 8).

d. Attach the closing ring to the worm housing and screw it on

tight with your hands.

5. Process the wrapping mixture in the mincer with the attached

chopper attachments (see fig. 9). The finished product will be one

long wrapping. Cut the wrapping into convenient seize.

6. Freeze the wrapping shortly.

7. Fill the wrapping with the filling mixture.

8. Fry the wraps with some olive oil until it has the favored

browning.

Care and cleaning

WARNING: Never hold your face or other body par ts over the feed funnel when the motor

is running because little pieces of food could be thrown out of the feed funnel. Never put

foreign substance or hard objects into the feed funnel.

Before the mincer is used for the first time, all parts – with the exception of the motor block –

must be thoroughly cleaned in war m soapy water.

41400_Manual_Fleischwolf_Juli2009.qxp 19.11.2009 09:24 Seite 27

1 2 ... 5 6 7 8 9 10 11 12 13 14 15

No comments

Gastroback Design Mincer Operations Instructions Page 10