Gastroback 41402 Operations Instructions download pdf (Page 2)

people have to be supervised using the appliance. This appliance is not intented for use by persons

(including children) with reduced physical, sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or instruction concerning use of the

appliance by a person responsible for their safety. Children should be supervised to ensure that

they do not play with the appliance.

• Never leave the mincer unattended. Keep the appliance well out of reach of children. Store

the appliance and units out of reach of children.

• The work space has to be easily accessible, solid, even, dry and of sufficient size. The

mincer should only be set up on a firm level work surface. Never situate the appliance close

to the edge of the working area. Ensure that the power supply cable does not hang down from

the work surface as it could be easily pulled, particularly by small children, thereby causing serious

accidents.

• Never cover the air box on the back of the appliance. The air has to able to circulate.

• Never immerse the motor block in water! Short-circuit danger! Do not put any cloth or

napkins underneath the appliance to avoid endangering by fire and electric shocks.

• Never situate the appliance close to a strong heat source or a hot surface (for example:

heater, stove or grill).

• Ensure that the switch and cable do not come into contact with water! Should this

inadvertently happen, all parts must be completely dry before the appliance is used again.

• Never let water or other liquids run into the motorblock.

• Never clean the line cord or the appliance in the dishwasher, poor liquids over the

appliance or douse or dip it in water or other liquids. In case that water or other liquids ran

into the appliance while operating turn OFF the appliance immediately, pull the plug and dry

the appliance with a clean cloth (´Care and cleaning`).

• Do not use the appliance in moist and wet areas.

• Check the power supply cable regularly for wear and damage.

• The mincer must only be connected to a 220-240 V power supply.

• Always disconnect the power supply cable from the mains before assembling, dismantling

and cleaning the appliance or before exchanging mincing plates.

• Always uncoil the line cord completely before installing the appliance.

• Place the appliance close to a power point and connect it directly without using any extension

cords to avoid additional risks of injury through fire or voltage.

• Only install the appliance in proper form secure grounding receptacle with adequate

electric power supply (alternating current; 220-240 V, 50 Hz) and ground fault circuit interrupter.

The maximum power consumption of the appliance is 800 Watt. You should also install a fuse

with a release current of maximum 30mA. If necessary ask your electrician for help.

• Never pull, rip, bend, clamp, squish or knot the line cord. Pay attention to the line cord not

hanging of the table. Attend to nobody getting caught in loops of the line cord or pulling the appliance

of the work space. When pulling the plug always catch hold of the enclosure of the plug.

Congratulations on the purchase of your new Gastroback Mincer and hope that it will soon

convince you of its many advantages.

You will soon find that the Gastroback Mincer is an exceptionally efficient and robust appliance

for processing meat and vegetables.

Safety and Operating Instructions

Gastroback recommends safety first

We at Gastroback are very safety conscious. We design and manufacture consumer products

with the safety of you, our valued customer foremost in mind. In addition, we ask that you exercise

a degree of care when using any electrical appliance and adhere to the following precautions.

Carefully read all instructions before operating and save for future reference.

The mincer is used for mincing meat (uncooked or cooked) and soft vegetables. Please prepare

the ingredients before filling them into the feed funnel. Using the feedstick you press the food

slowly into the worm which pushes it against the spinning crossed-blades knife.

The knife and the worm are driven by a strong motor - 1000 watt max. power. The finished

mince discharges through the grinding disc. The appliance has an overload protection which

prevents the motor form overheating.

The appliance is maintenance-free, very insusceptible and easy to use. All parts that come

into direct contact with the food are easily to remove and easy to clean. No extra tools are

necessary for assembling or disassembling the appliance.

Important safeguards for your Gastroback

Design Mincer

Please read all the advice and instructions with care and keep the manual. Only use

the appliance as stated and only for thus use. Any non-appropriate use and misusage can

cause damages and heavy personal injuries through voltage, fire and moving units. Only proceed

the appliance as described in the directions and for the intended purpose.

• Reparation and technical maintenance of the appliance or line cord are just allowed to

be accomplished by an authorised specialist reparation shop.

• Only use the appliance indoors.

• Do not use the appliance in moving vehicles or boats. Do not use the appliance outdoors.

• Only use units, spare parts and supplies which are provided and recommended by the

manufacturer. Damaged or improper units may break in use, damage the appliance or cause injury.

• Never try to take the appliance to pieces or open it.

• Never leave children unsupervised when the appliance or units of the appliance are in reach.

• Never let children play with the appliance or units of the appliance. Children and invalid

Directions for Use

20 21

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Gastroback 41402 Operations Instructions Page 2

Comments to this Manuals

Related products and manuals for Mincers Gastroback 41402