Gastroback 41400 Operations Instructions download pdf (Page 29)

ating turn OFF the appliance immediately, pull the plug and dry the appliance with a clean

cloth.

8. The motor block must only be wiped clean with a moist cloth. Do not clean the motor block

under flowing water, nor should it be immersed in water! Do not use alcohol, benzine, etc.!

9. Grease the mincer plate and knife with salad oil to prevent air corrosion.

Storage

Always clean the appliance before storing.

ATTENTION: Store and use the appliance in a clean, frost free environment where it is

protected from dampness, moistness and immoderate and extraordinary burden (such as:

downfall, beat, overheating, moisture in the motor block). Never lay heavy or hard objects

on top of the appliance.

10.Always assemble the appliance for storing. This way the parts are protected and can not

get lost.

ATTENTION: Never pull, rip, bend, clamp, squish or knot the line cord.

Trouble shooting guide

The mince is not fine enough.

There are still ingredients in the feed funnel

but no mince is coming out of the mincer.

The motor stops running while operating.

After cleaning the motor does not get started

again when turning the appliance ON.

Possible problem Easy solution

Use a smaller mince plate and/or mince the ingredients more then

once.

The mincer is blocked. Turn the appliance OFF immediately and operate

according to the instructions ´Clear a blocking`.

The overload protection might got activated. Turn the appliance OFF

immediately and operate according to the instructions ´Clear a blocking`.

• Is the power cord plugged in?

• The motor might be blocked with some hard substance (for example a

bone). Turn the appliance OFF immediately and pull the plug.

• Disassemble and clean the appliance. Operate according to the

instructions ´Care and cleaning`.

• If the problem is not solved after the cleaning, take the appliance

for technical maintenance and repair to an authorised specialised

reparation shop.

41400_Manual_Fleischwolf_Juni2008.qxp 11.06.2008 11:04 Seite 29

1 2 ... 24 25 26 27 28 29 30 31 32

No comments

Gastroback 41400 Operations Instructions Page 29