USING YOUR DESIGN SANDWICH PRO
Before first use
Before first use the sandwich maker should be preheated for ten minutes closed and the tempe-
rature control set to the highest setting. This will remove the smell typically encountered when
first switching on the sandwich maker. Please ensure sufficient ventilation. Clean the appliance
afterwards as described in ›Care and cleaning‹.
Before first use and after a long period of storage, clean the appliance with a damp soft cloth
and warm soapy water (see: ›Care and cleaning‹).
WARNING! Always unplug the appliance and wait for the appliance to cool down, before
cleaning. Do not pour or drip any liquids on the appliance or power cord. When liquids are
spilled on the appliance, immediately unplug the appliance and dry it to avoid risk of electric
shock or fire. Do not attempt to operate the appliance, when liquids are on or in the electrical
section of the appliance. Do not clean the appliance in the dishwasher.
Note: When using the Design Sandwich Pro for the first time, you may notice a fine smoke
haze, because of the first heating of some of the components. There is no need for concern. To
prevent smell and taste of your food from being affected, you should heat the appliance on the
highest temperature control setting without any ingredients. If the burnt smell occurs again on
later use, clean the appliance (see: ›Care and cleaning‹). If the burnt smell persists stubbornly
even after thoroughly cleaning the appliance, return the appliance to an authorised service
centre for examination and repair.
1. Unpack the appliance carefully and place it on a suitable working surface. Remove all pro-
motional materials and packing and place the appliance on a convenient surface (see: ›Safety
instructions‹). Do not remove the rating label.
2. Wipe the heating plates with a damp soft cloth and warm soapy water. Dry it properly after
cleaning.
3. To grease the heating plates, wipe the heating plates with a paper towel greased with oil.
The non-stick coating is now prepared for use.
4. Connect the appliance with the power outlet. Preheat your Design Sandwich Pro approxi-
mately for five minutes. The green indicator light will be illuminated when the appliance is
preheated and ready for filling in the sandwiches.
Use
1. Prepare the ingredients for the sandwiches and garnish the non-toasted bread.
2. Place the appliance on a well accessible, stable, level, dry, and suitable large table or
counter. Do not place any cloth or tissue beneath or on the appliance, to avoid any risk of fire,
electric shock and overheating. Always keep the table or counter clean and dry and immedi-
ately wipe off spilled liquids. Ensure that there is no foreign substance on the heating plates.
Close the lid. Do not touch the exterior of the Design Sandwich Pro while the appliance is in
use. Always keep your hands, face and arms as well as any clothing and other heat-sensitive
objects away from the sandwich maker during operation and only touch the handle, or the
temperature control. Do not touch the heating plates.
Connect the appliance directly to a
separately protected mains power supply wall socket with protective conductor (earth/ground;
230 V, 50 Hz, AC, rated for 16 A). The red indicator light will turn on as soon as the plug is
connected to the power outlet and the heating plates begin to heat.
23
(12 pages)
(16 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals