Gastroback 41406 Design Mincer Electronic Pro User Manual download pdf (Page 11)

ATTENTION: Do not use any tools, for tightening the screw and pay attention not to

cant the screw. If the screw cants the screw thread gets damaged. If the screw does

not turn easily put some sunflower oil (or other edible oil) on the screw.

4. Refer to ´Assembling for mincing` step 3 for further steps for assembling.

Assembling for making cookies

1. Picture C: Take the worm housing into the right

hand and insert with your left hand the worm inside

the worm housing. The side of the worm with the plas-

tic end has to face the worm housing when putting

it inside the worm housing. If the worm is correctly

assembled when the plastic end of the worm pokes a

few millimetres out of the worm housing.

2. Take the adaptor disc. The small end with the

recess has to face the worm when attaching. If necessary turn the adaptor disc a

little bit until the arresting pin of the worm housing locks precisely into the correspon-

ding recesses of the adaptor disc.

IMPORTANT: If the tools overlap the edges of the worm housing the worm is not

placed all the way inside of the worm housing. Turn the worm a little bit to make it

fit inside but do not use force. If mounted correctly the adaptor disc is flush with the

front of the worm housing and the axis of the worm pokes out 2 mm of the grinding disc.

3. Place the cookie attachment on the worm housing. The flat

end has to face the worm housing when attaching. Fit the closure

ring over the cookie attachment (picture D). Firmly screw the

closing ring on the worm housing and tighten by hand.

ATTENTION: Do not use any tools, for tightening the screw and

pay attention not to cant the screw. If the screw cants the screw

thread gets damaged. If the screw does not turn easily put some

sunflower oil (or other edible oil) on the screw.

4. Refer to ´Assembling for mincing` step 3 for further steps for

assembling.

5. If the appliance is assembled take the cookie attachment

blade and slide it into the cookie attachment (picture E)

and choose the desired cookie shape. Ensure the handle is

facing away from the attachment when sliding it in other-

wise you cannot use the cookie shape that is the closest to

the handle (picture F).

The cookie attachment is ready for operation.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 21 22

No comments

Gastroback 41406 Design Mincer Electronic Pro User Manual Page 11